Anyone familiar with hydraulic motor knows that it is an energy conversion device that converts the hydraulic energy supplied by the oil pump into mechanical energy. Hydraulic motors are used in injection molding machinery, ships, hoists and other industries. Today, I would like to introduce a hydrostatic motor, which is the most advanced in industry. That is, the hydrostatic motor with bent shaft style.

Its building block style design, using standard aperture and standard installation size, provides the best product architecture for your application, and saves high customization costs. Today's motor displacement range is very wide, providing the best component matching and the best system performance. The ratio of the maximum and minimum displacement is five to one, which simplifies the transmission chain, and provides the best combination of torque and speed according to needs, so as to minimize the busy of the pump and prime mover. A complete set of monitoring system can be modified to make the operating machine or mechanical interface meet the customer's requirements. Two position hydraulic control or electronic control controller provides the possibility of selecting the working mode of "maximum torque" or "maximum speed". Proportional hydraulic control or electric control controller provides various combination opportunities for torque and speed.

The above is the hydrostatic motor introduced to you. This kind of hydraulic motor has good processability, is easy to manufacture and process, and the friction pair is statically balanced with low wear, so it develops rapidly at home and abroad. It used to be the most widely used hydraulic motor in domestic marine machinery.